The N-Ject LF system uses Capstan Ag’s patented Pulse-Width Modulation technology as a simple way to adjust the flow in respond to rate and speed. The system responds as needed from five GPA to 50 GPA for a variable rate map prescription.
Key Features:
- Automatic rate change: Rate management starts with the rate controller. The rate controller may be set up for a single rate or to respond to rate changes dictated by a prescription map. The rate controller sends a signal to the N-Ject LF system to increase or decrease the flow. The N-Ject LF instantaneously adjusts the nozzles to execute the required flow. No need to change orifices for the different rates.
- Even flow distribution across the tool bar is achieved by the metering accuracy and speed of the PWM nozzles.
- Instant ON/OFF at the ground is achieved by the nozzles immediate OFF /ON response coupled with capillary action of the supply tubes.
- Significant overlap savings occurs when the rate controller is loaded with swath control software that communicates with the N-Ject LF nozzles to automatically and instantaneously turn OFF /ON as required by an As-Applied map. N-Ject LF permits customization of the toolbar to define the number of knives/coulters per section.
| Application Range, GPA/ACRE | |||||
| 30″ Spacing W 5/32 N-JECT LF | |||||
| PSI | 4-mph | 6-mph | 8-mph | 10-mph | 12-mph |
| 20 | 3 to 70 | 2 to 50 | 2 to 35 | 1 to 28 | 1 to 23 |
| 40 | 4 to 100 | 3 to 66 | 2 to 50 | 2 to 40 | 2 to 33 |
| 60 | 5 to 120 | 3 to 80 | 3 to 60 | 2 to 48 | 2 to 40 |
| 80 | 6 to 140 | 4 to 90 | 3 to 70 | 3 to 56 | 2 to 47 |
